How to flash your Sony Ericsson phone.

Hey Guys,   
no way of turning your favourite walkman into a brick !!!!!   

I have read many tutorials on this topic but they are long and complex,
here i am trying to explain you the flashing in 10 simple steps.....

5 4 3 2 1 0 GO.............

1. DOWNLOAD NECESSARY FILES BEFORE STARTING THE PROCESS.
FAR MANAGER v1.70
SEFP PLUGINS(SEFP v01004 & SEFP v010051)
CID 49 PACKAGE
XS++ v1.2
W810i MAIN FIRMWARE
USB FALSH DRIVERS

2. AFTER YOU HAVE DOWNLOADED ALL THIS FILES....

- INSTALL FAR MANGER
- INSTALL XS++
- EXTRACT SEFP PLUGINS TO THE PLUGINS FOLDER OF FAR MANAGER
- EXTRACT sefp0.10.0.51patch.exe FROM CID 49 PACKAGE TO THE PLUGINS FOLDER OF FAR MANAGER AND PATCH sefp.dll.

3. TURN OFF YOUR PHONE AND REMOVE MEMORY STICK. CONNECT IT WITH PC BY HOLDING 'C' ON THE PHONE. INSTALL THE NEW HARDWARE USING,
USB FALSH DRIVERS.
DISCONNECT THE PHONE.

4. OPEN XS++, SELECT USB FROM COMMUNICATION SETTINGS AND CLICK ON START.

- CONNECT YOUR PHONE BY HOLDING C TO THE PC WITHIN 30 SECONDS

5. AFTER XS++ HAS RECOGNIZED THE PHONE,

- CHECK THE BOX MARKED ' FLASH MAIN FIRMWARE
- DO NOT CHECK ' FLASH FILE SYSTEM ' (u will have to render ur phone to waste)
- SELECT w810_p3k_dcu.49R.ssw (located in CID49 package)
- FLASH IT....
- THERE ARE 5 FLASH BLOCKS AND IT TAKES ONLY 5 SECS. 
- AFTER FINISHING FLASHING CLICK ON STOP AND DISCONNECT THE PHONE
- REMOVE BATTERY FOR 3 SECS

6. OPEN FARMANAGER

- PRESS F11 ON THE KEYBOARD
- CHOOSE SEFP 0.10.0.51
- SELECT Bootscript: w300_w810_z550_cid49 and press Enter The Matrix.
After a while you'll be in the w810i
- make desirable changes for phone default sounds, audio drivers, camera drivers or delete protected files by entering in fs.
- When done, Go back to root (choose '..' all the time) until FAR asks to exit CSFS loader, choose yes.
- Exit FAR-manager
- Disconnect the phone and REMOVE BATTERY FOR 3 SECS

7.AFTER XS++ HAS RECOGNIZED THE PHONE,

- CHECK THE BOX MARKED ' FLASH MAIN FIRMWARE
- DO NOT CHECK ' FLASH FILE SYSTEM ' (u will have to render ur phone to waste)
- W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn, 344 flash blocks
- FLASH IT.... 
- AFTER FINISHING FLASHING CLICK ON STOP AND DISCONNECT THE PHONE
- REMOVE BATTERY FOR 3 SECS


8. RESTART YOUR PHONE. IT WORKS AS BEFORE IT WAS    

9. DO NOT FLASH FILE SYSTEM IT DAMAGES THE PHONE

10. I AM SURE THAT U HAVE ENJOYED THIS SESSION. PLEASE DONT MAKE UNNECESSARY CHANGES IN FAR WITHOUT NECESSARY REFERENCE. IT MA LEAD TO MALFUNCTION OF YOUR W810i

NB - SORRY FOR SPELL MISTAKES(if any)

      :